All categories
0

How to use sterilizer? How to use accuracy?

2026-1-12

In modern society, people have higher and higher requirements for their quality of life, so sterilizers are used in medical and experimental industries. Of course, this kind of equipment is also used in industry, but different types of equipment are used in different fields of use. However, in order to achieve better use effects, the operating standards must be followed during use. Next, let's take a lookHydrogen peroxide sterilizerUse of Equipment.

Introduction to how to use the sterilizer:
1. Carry out preliminary treatment of items to be disinfected
In many cases, once medical equipment, clothing and other items come into contact with pathogenic microorganisms, they need to be disinfected with chemical disinfectants and then cleaned. Especially items used in infectious disease wards must be classified and packaged after disinfection to avoid re-contamination.
2. Have appropriate containers and packaging for disinfection items
Packaging usually uses double-layered white cotton cloth. New wrapping cloth must be washed and destarched before use. When items are packaged, they must be tied with strings. They must not be loose or spread out, nor be too tight. Of course, it is also recommended that you use containers, because using containers not only blocks the invasion of external microorganisms, but also has good steam penetration.
3. Place disinfection items reasonably
There are too many sterilizing items in the sterilizer or they are placed in the wrong position, which will affect the sterilization effect. The items in the equipment should not be too crowded, let alone exceed the capacity of the pot. Try to put similar items together for sterilization.
4. The air must be drained cleanly
When using the equipment, be sure to achieve a vacuum state. If there is air in the equipment, the pressure pointed by the air pressure needle is not generated by saturated steam, because at the same pressure, if air is mixed in, its temperature will be lower than the temperature generated by saturated steam.
5. Precautions after sterilization
When taking out sterilized items, the items need to be dried and the indicator reaches the sterilization requirements before they can be taken out. When taking them out, aseptic operations must be performed. When opening items, the lids must be closed first and placed in categories.
The above is the relevant introduction to the sterilizer. I hope this content can provide help to those in need. In fact, when operating this equipment, professional manufacturers will give correct technical guidance and training. Therefore, during use, as long as you follow the operating specifications, you can achieve your own usage goals and extend the service life of the equipment.